glue-ups, end view Top and bottom shelf added All the parts, but the plywood shelf from water bed frames, to this Which's Brew Walnut stain. Size is 16" wide(top) by 48" long, with the legs at 32" high. About a weekend's work.
Just a simple little table, small drawer. Legs were tapered using a handplane, mortises done with just a chisel. About 24" high, by 24" square on the top. A weekend's work to make, another to finish. Golden Oak stain, with three coats of...
Black Cherry, resawn from a floor joist. Quartersawn White Oak, from a barn rafter. Glued up the Cherry into a panel, cut handles in the QSWO , and miter the corners. Wood came from an old garage that was torn down, my cost was just the gas to hual the...
i needed a few planes for the shop. Decided to go visit a few "thrift stores" in my area. Found a few rusty, CHEAP planes. Just needed some work to clean back up , and return to service. A Stanley Bailey #8c at one shop @ $25??? Sold !! Kind...