Friction-Free Table Saw

You need to get away from Qick time, would not work in my pc.

To jgm0658,

Since Quick Time is free, go ahead and download it on your own computer and enjoy these videos.

Best,

Serge

I remove the rust in the same manner as showen in the vidio including the wiping up of the lubircent used... then I use lacquer thinner to remove all residue & use a good automobile wax. It leaves a hard slippery long wearing surfice!

Here in Phoenix, the only time I have a rust problem is from drops of sweat falling onto the tabletop!

I have found "Top Coat " to be a good product for keeping machine tops slick. It's more costly than a can of paste wax but it's quick and easy with no residue.

well i tried the product topcoat and i tried the minwax pastewax and my table still gets rusty little spots here and there my boss told me to try steel wool to clean the rust spots if it dont work i dont know what to do i bought a delta saw brand new and i was waxing it every week so i dont know what im doing wrong? ike cambridge mass.