Subscribe to Print Subscribe to Digital Give as a Gift Renew Now Subscriber Services
Free Product Guide >>
I have a 4 foot long newell post and need to bore a 7/16 hole, 3 inches deep. How do I ensure the hole
is straight and parallel to the post. If it was bored crooked, it may not look straight after installation. I have a floor
drill press but at a loss on how to mount it so that the post is straight and in line with the press. Any help would
be appreciated. tomrbensin@aol.com
Best I can help is the following link:
http://www.woodmagazine.com/woodworking-plans/drilling/bore-vertical-holes-with-scrap-stock-jig/
Good Luck