http://americanwoodworker.com/forums/2421.aspxenCommunityServer 2008.5 SP1 (Debug Build: 31106.3070)http://americanwoodworker.com/forums/thread/5366.aspxSat, 03 Apr 2010 11:20:03 GMTf5d4cb8b-9fb3-4c0a-bdc0-3814c4db8d93:5366DUSTY MILLER0http://americanwoodworker.com/forums/thread/5366.aspxhttp://americanwoodworker.com/forums/commentrss.aspx?SectionID=2421&PostID=5366<p>IF IT WERE ME I WOULD USE BISCUITS TO JOIN TIMBER PLUS USE CASAMITE GLUE. ALSO YOU DO NOT SPECIFY WHICH CEDAR YOU ARE USING. THERE IS WESTERN RED CEDAR- EASTERN WHITE CEDAR-ATLANTIC CEDAR- INCENSE CEDAR -NORTHERN WHITE CEDAR- PORT ORFORD CEDAR-AND SOUTHERN RED CEDAR. DO YOU KNOW WHICH ONE YOUR USING? </p><div style="clear:both;"></div>http://americanwoodworker.com/forums/thread/5313.aspxWed, 24 Mar 2010 16:24:23 GMTf5d4cb8b-9fb3-4c0a-bdc0-3814c4db8d93:5313American Woodworker Editors0http://americanwoodworker.com/forums/thread/5313.aspxhttp://americanwoodworker.com/forums/commentrss.aspx?SectionID=2421&PostID=5313<p>Depends on what you&#39;re building.</p> <p>If it&#39;s for a piece of furniture you can to simply joint the edges square and glue them together. Make sure the wood is dry (6-12% depending on your area of the country)</p> <p>If it&#39;s for an paneled wall, then T&amp;G is a very good option. It allows each peice to expand and contract without creating a viable gap between the pieces.</p><div style="clear:both;"></div>http://americanwoodworker.com/forums/thread/5280.aspxTue, 16 Mar 2010 21:21:21 GMTf5d4cb8b-9fb3-4c0a-bdc0-3814c4db8d93:5280rboyatt0http://americanwoodworker.com/forums/thread/5280.aspxhttp://americanwoodworker.com/forums/commentrss.aspx?SectionID=2421&PostID=5280<p>What is the best way to join cedar boards to make one large piece? I have been told that tongue and groove is the only effective way.</p><div style="clear:both;"></div>