http://americanwoodworker.com/forums/2416.aspxenCommunityServer 2008.5 SP1 (Debug Build: 31106.3070)http://americanwoodworker.com/forums/thread/40781.aspxSun, 24 Feb 2013 01:38:59 GMTf5d4cb8b-9fb3-4c0a-bdc0-3814c4db8d93:40781Nels0http://americanwoodworker.com/forums/thread/40781.aspxhttp://americanwoodworker.com/forums/commentrss.aspx?SectionID=2416&PostID=40781<p>Tom,</p> <p>Try rubbing it out with 600 grit wet/dry paper and water or Mineral Spirit if no luck move&nbsp; to 500 or 400</p> <p>Good Luck</p> <p>Nels</p><div style="clear:both;"></div>http://americanwoodworker.com/forums/thread/40780.aspxFri, 22 Feb 2013 15:29:29 GMTf5d4cb8b-9fb3-4c0a-bdc0-3814c4db8d93:40780Tom Guilbault0http://americanwoodworker.com/forums/thread/40780.aspxhttp://americanwoodworker.com/forums/commentrss.aspx?SectionID=2416&PostID=40780<p>I recently finished building a cherry blanket chest but I made a mistake in the finish process. I&#39;m looking for some direction to correct my mistake. I first applied two coats of sanding sealer ( wax free shellac ), then I applied a coat of burnt umber glaze with glazing medium. After drying I decided to add a second coat of glaze to darken the color but after applying the second coat I got called away to do something else. By the time I returned the second coat of glaze had dried and I could not rub it out.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p> <p>Can someone please let me know what my options are for correcting this problem ? Should I add a third coat of glaze , strip the finish down, or sand it down. I would greatly appreciate your help in this matter.</p><div style="clear:both;"></div>