On newsstands
now!

Preview Issue

Local Guides

Well-Equipped Shop - Make Your Own Flooring
by American Woodworker Editors Tuesday, April 19, 2011
Make Your Own Flooring Let's say you've found a way to get a lot of lumber for next to nothing. You’re working on your house, and you want to mill some of that wood for molding; no problem, there are lots of router bits available for that...
Well-Equipped Shop - No-Math Dado Setup
by American Woodworker Editors Tuesday, January 18, 2011
No-Math Dado Setup In-between size dadoes are much easier to set up using this go/no-go gauge from Infinity. Usually you have to make a lot of trial-and-error cuts to create a tight groove for an in-between piece of wood, such as an undersized piece of...
Tool News - Infinity Hardwood Floor Bit Sets
by American Woodworker Editors Wednesday, June 3, 2009
Infinity Tools has some new bits for making hardwood flooring. They're specially-designed to leave a small gap at the bottom of the joint between pieces. This makes getting a snug fit easier. Infinity has two sets available at special prices right...